Facilities

Powermax Engineering Ltd is very much a hands-on work, but without the use of machinery and dedicated workspace, the superior quality that we provide would not be possible.

With a combination of our team's industry knowledge, dedicated workspace and the use of great machinery, we are able to provide a large variety of services. We are constantly upgrading the workshop by adding new machines and work areas as the demand increases for specific jobs. This allow's us to offer a larger variety of services while staying true to our goals of delivering the high-level results our customers expect.

Below is some of the machine's and work areas we currently use in our workshop, along with a small sample of the jobs we carry out. Not all possibilities are listed so if you have a special request or job in mind do not hesitate to give us a call to see if we are able to accommodate your request.

We are constantly upgrading and adding new machines to our workshop as demand increases for certain jobs which allow's us to add to the list of services that we provide. Be sure to stay up to date with any new arrivals by checking out our News page or adding us on any of our social media accounts for live updates.

  • 2-Post Car Lift

    Having 2 x 2-post car lifts in our workshop space gives us an unique advantage over our competitors as we can use these along with our extensive mechanical skill and knowledge to offer fitting opti...
    View More
  • 4WD Rolling Road

    Our 4WD DAZTEK rolling road uses the very latest in digital dyno range. It's capable of measuring up to 2000BHP and is was custom made and installed by ourselves in a dedicated workshop area.Do not...
    View More
  • Abrasive Blast Cabinet

    Our abrassive choice for our blast cabinet is glass beads in a pressure blast system. The abrasive is stored in the pressure vessel then sealed. The vessel is pressurised to the same pressure as th...
    View More
  • Berco ASV Seat & Guide Machine

    Our Berco ASV Seat & Guide Machine is a high precision Italian made machine for the reconditioning and fitting of valve seats and valve guides to both petrol and diesel cylinder heads.It uses a dig...
    View More
  • Berco Vertical Boring Mill

    Our Berco vertical milling machine is a precise, fast and reliable boring machine. It provide us with a milling capability using a manual table feed and along with some custom adapters manufactured...
    View More
  • Boko Hydro Mill

    Boko Hydro MillOur Boko Vertical Hydromill Vertical Mill has a table size of 1200 x 800mm. It consists of power feeds in all ways including table rotation and a 3 axis SONY DRO.Main services we perform on this ma...
    View More
  • Chemical Parts Washer's

    We use multiple washers depending on the item needing washed and level of pressure or force needed to remove dirt from concentrated areas.These processes are really effective for applications which...
    View More
  • Cincinnati No.3 Horizontal Mill

    The Cincinnati No.3 horizontal milling machine is a very robust and sturdy machine. A variety of cutters allow us to machine components that would normally be held in place via the machines vice...
    View More
  • Colchester Master Center Lathe

    Colchester Master Center LatheOne of the three lathes we house in Powermax is our Colchester Master Center Lathe. This lathe is the smallest of our set.Our Colchester Master lathe is operated manually meaning that we operate th...
    View More
  • Cylinder Head Pressure Tester

    Cylinder Head Pressure TesterThis machine is used for one purpose only, detection of cracks. This will be needed in if the engine has overheated, cooling system pressurising or mixing liquids such as oil/water/diesel.Our cylin...
    View More
  • Delapena500 Vertical Honing Machine

    Our Delapena 500 honing machine has the capability of honing cylinder block chambers to a preset size. Honing provides the smooth sinish required to allow the new piston rings to correctly seal to ...
    View More
  • Herbert 47V Vertical Mill

    Herbert 47V Vertical MillWe use our Herbert 47V Vertical Mill to shape metals such as mild steel and aluminium. A full-size milling machine such as this is powerful but also very accurate & precise. There is a wide selecti...
    View More
  • Kemppi TIG Welder

    Kemppi TIG Welder
    View More
  • Mecof CS6 Mill

    Our Mecof mill travels of a 3 axis system with a powered boring spindle which allows us to complete both fast material removal using the vertical head as well as high-precision work on simple flat ...
    View More
  • Mitchell Center Lathe

    The second largest of our three lathes is our Mitchell Center Lathe. This lathe is operated manually meaning that we operate the device directly while working on an item rather than a CNC lathe wer...
    View More
  • Murex ARC Welder

    Murex ARC Welder
    View More
  • Open Work Tables

    Spacious clean working area used for various jobs such as engine building and research & development.
    View More
  • Prince Crankshaft Grinder

    The PRINCE is a dedicated crankshaft regrinding machine specially designed for use in vehicle engine re-manufacturing workshops. Its defining feature is that it can regrind both the main and con ro...
    View More
  • Richards Horizontal Boring & Facing

    Richards Horizontal Boring & FacingWe use our Richards horizontal boring & facing machine to create custom work by boring, facing, milling and pitching circlular holes as well as drilling various components to specialized fabricatio...
    View More
  • Schou Vertical Spindle Grinder

    Schou Vertical Spindle GrinderA surface grinder is used generally to provide precision ground surfaces, either to a critical size or for the surface finish. Our vertical grinding spindle is mainly used for fast material removal...
    View More
  • Snow Surface Grinder

    Snow Surface GrinderA surface grinder is used generally to provide precision ground surfaces, either to a critical size or for the surface finish.Our Snow Surface Grinder uses hydraulics and electrics to perform an ev...
    View More
  • Storm Vulcan Line Borer

    The Storm Vulcan Line Boring machine provides us with the ability to re-condition bearing caps that have run the main bearings due mainly due to oil starvation. This process is also known as housin...
    View More
  • Tarnow Heavy Duty Center Lathe

    Tarnow Heavy Duty Center Lathe One of the three lathes we house in Powermax is our Tarnow Heavy Duty Center Lathe. This lathe is the largest lathe of our set. Having 3 separate lathes of different capacities allows use to work o...
    View More
  • Wadkin Interwood Vertical Linisher

    Wadkin Interwood Vertical Linisher
    View More